TONY BINGELIS BIBLIOGRAPHY
Procedures and Guidelines | Winners | Nomination Form | Tony Bingelis Bibliography
Tony’s Bio | Tony’s Photo Album | Tony Bingelis Judging Criteria
An alphabetical bibliography of articles written by Tony Bingelis and published in SPORT AVIATION
- AN Fittings (SB)|SA90(3):29
- Adhesives (Pt.1)(SB)|SA88(10):33
- Adhesives (Pt.2)(SB)|SA88(11):29
- Adjustable stand,bench saw scarfer,tubing jig,fire safety (DC)|SA72(3):14-15
- Aircraft Parts Materials/Used,new,metal,wood,salvage (DC)|SA72(2):32
- Aircraft Seats/Design,construction,drawings (DC)|SA73(1):49
- Aircraft Wiring (SB)|SA95(3):71-75
- Aircraft Woodwork Basics (SB)|SA96(9):75-80
- Alignment Procedures (TB)|SA72(3):46-47
- Alignment during Construction (SB)|SA86(9):29
- Altitude Encoders (SB)|SA88(8):27
- Anchor Nuts (SB)|SA94(3):72-76
- Baffles (SB)|SA90(2):29-34
- Baffling your Lycoming (Pt.1)(SB)|SA86(10):27
- Baffling your Lycoming (Pt.2)(SB)|SA86(11):35
- Batteries (SB)|SA89(9):27
- Battery Box (SB)|SA75(10):74
- Battery Box Construction/Diagrams (SB)|SA75(11):16-17
- Battery Location (SB)|SA75(10):73
- Battery Problems(SB)|SA87(1):35
- Before You Try Your Hand with Fiberglass (SB)|SA96(2):83-87
- Before it Goes to Airport (SB)|SA94(10):86-91
- Better Paint Job Tips(SB)|SA92(8):82-87
- Biplane Rigging (SB)|SA88(2):27
- Blunders/Mistakes due to haste,carelessness,inexperience (SB)|SA77(7):12
- Brake Installation (SB)|SA87(10):31
- Brakes, Parking(SB)|SA83(6):27
- Brakes/Mechanical,hydraulic (DC)|SA74(3):25-26,60-61
- Builders Never Had It So Good (SB)|SA96(8):74-80
- Building Sequence (SB)|SA93(11):69
- Building Wood Fuselages (SB)|SA96(5):73-78
- Bungee Cords (DC)|SA73(5):48
- Bungee Installation Tool (SB)|SA88(9):27
- Bushings and Bearings (SB)|SA80(5):60
- Cabin,Cockpit Heat (SB)|SA76(4):33
- Cable Terminals & Connections (SB)|SA81(10):39
- Canopies (SB)|SA92(10):112-117
- Canopy Latches (SB)|SA78(10):19
- Canopy Options (SB)|SA84(2):15
- Canopy Retention (SB)|SA78(10):16
- Canopy, Sliding (SB)|SA84(3):27
- Carving Foam Seats (SB)|SA90(8):28-32
- Clamps & Clamping(SB)|SA83(2):30
- Closing a Wood Structure (DC)|SA74(4):53
- Cockpit Mock-up (SB)|SA76(5):60
- Cockpit Noise (SB)|SA92(6):80-84
- Cockpit Standardization [Panels](SB)|SA79(9):35
- Cockpit Ventilation (SB)|SA76(6):26
- Construction Methods/Metal wing ribs (Pt 2)(SB)|SA76(10):24-26
- Control Cable Fabrication (DC)|SA72(6):35
- Control Cable Routing (DC)|SA73(8):17
- Control Surface Balancing In Homebuilts (SB)|SA96(12):76-80
- Control Surface Flutter Problems (SB)|SA79(7):49-51
- Control Systems (SB)|SA93(9):82-86
- Costs, Keep Down (SB)|SA91(9):29
- Cowl Flap Actuator,Automatic (SB)|SA77(9):56
- Cowling Installation (DC)|SA74(2):51
- Cowling Installation (SB)|SA86(5):23
- Cowling Installation Notes (SB)|SA96(10):86-90
- Dacron (DC)|SA72(7):37
- Deburring Practices (SB)|SA93(1):67-68|(il)
- Drag Reduction(SB)|SA92(9):72-76
- Drill Usage (SB)|SA95(2):60-65
- Drilling Gear Legs (SB)|SA90(3):29-30
- Drilling Holes (SB)|SA89(4):28
- Drills Drilling (SB)|SA94(4):94-98
- Drills and Bits (SB)|SA93(2):65
- Drooped Snoot Leading Edge (SB)|SA77(2):23
- Electrical Bonding (SB)|SA84(8):20
- Electrical Grounding (SB)|SA94(5):88-90
- Electrical System (SB)|SA90(4):37-41
- Electrical System (SB)|SA90(5):29-32
- Electrical System 12 vs 24 volts (SB)|SA89(12):37
- Electrical System [3] Wing Tips (SB)|SA90(6):33-37
- Electrical Systems (Pt 1)(SB)|SA77(5):29
- Electrical Systems (Pt 2)(SB)|SA77(6):27
- Electrical Wiring Details (SB)|SA84(9):27
- Engine Baffles (DC)|SA73(10):14
- Engine Compartment Heat [Oil Cooler](SB)|SA84(12):12
- Engine Compartment Notes (SB)|SA91(8):54-58
- Engine Compartment Notes (SB)|SA96(11):77-82
- Engine Compartment Tips (SB)|SA90(12):29-32
- Engine Cooling (SB)|SA93(8):38-42|Cowl Ref
- Engine Hook-Up (SB)|SA89(8):27
- Engine Installation (SB)|SA89(7):27
- Engine Preparations (SB)|SA95(9):81-86
- Engine Selection (SB)|SA90(1):29-32
- Engine Selection (SB)|SA91(4):65-68
- Engine Stand (SB)|SA78(11):40
- Engines for Pushers (SB)|SA76(7):20
- Exhaust Stack Painting (SB)|SA89(11):40
- Exhaust Systems/Construction (Pt 3)(DC)|SA74(9):47
- Exhaust Systems/Mufflers,heat muffs,diagrams (Pt 4)(DC)|SA74(10):27-30
- Exhaust Systems/Planning (Pt 1)(DC)|SA74(7):31
- Exhaust Systems/Weldments (Pt 2)(DC)|SA74(8):50
- Exhaust Sytem(SB)|SA92(12):82-86
- FAA Inspections (DC)|SA74(4):52
- Fairing Strips/Construction methods (SB)|SA75(12):60-62
- Falco Getting Started (SB)|SA80(7):16
- Falco Progress Report (Pt.1)(SB)|SA80(6):20
- Falco Progress Report (Pt.4)(SB)|SA83(1):37
- Falco Progress Report (Pt.5)(SB)|SA84(4):15
- Falco Progress Report (Pt2)(SB)|SA81(5):12
- Falco Report (Pt.3)(SB)|SA82(2):52
- Fiber-glass Fairings (SB)|SA78(6):19
- Fiber-glass/Getting acquainted with material,process (DC)|SA73(4):42-44,
- Fiber-glass/Lightweight cloth for application over plywood (DC)|SA72(8):32
- Fiberglass Cowlings (Pt.1)(SB)|SA86(3):24
- Fiberglass Cowlings (Pt.2)(SB)|SA86(4):23
- Fiberglass Cowlings (SB)|SA91(11):84
- Fiberglass Cowlings (SB)|SA91(12):82
- Firewall, Stainless Steel (SB)|SA90(3):29-32
- Fittings (Pt.1)(SB)|SA80(9):12
- Fittings (Pt.2)(SB)|SA80(10):12
- Fittings (Pt.3)(SB)|SA80(11):16
- Flaco Flies(SB)|SA86(1):51
- Flight Testing (Pt.1)(SB)|SA89(1):27
- Flight Testing (Pt.2)(SB)|SA89(2):27
- Flight Testing (Pt.3)(SB)|SA89(3):28
- Flight Testing [First test flight](SB)|SA88(4):27
- Flush Riveting (SB)|SA87(4):34
- For easier Metal Work (SB)|SA91(6):36-39
- Fuel Gage (DC)|SA73(12):26
- Fuel Pump System (SB)|SA87(8):36
- Fuel Pump System (SB)|SA92(4):72-76
- Fuel Related Problems (SB)|SA94(6):69-73|
- Fuel System Management (SB)|SA79(10):24
- Fuel System Review (SB)|SA93(6):72-76
- Fuel System, Gravity Flow (DC)|SA73(3):16
- Fuel Tank Components (Pt1)(SB)|SA82(8):23
- Fuel Tank Components (Pt2)(SB)|SA82(9):21
- Fuel Tank, Aluminum (SB)|SA86(12):33
- Fuel Tanks, Aluminum (SB)|SA88(6):27
- Fuel Tanks, Fiberglass (Pt.3)(SB)|SA82(10):91
- Fuel Tanks, Fiberglass (Pt.4)(SB)|SA82(11):61
- Fuel Tanks, Fiberglass (Pt.5)(SB)|SA82(12):38
- Gelled Electrolyte Battery (SB)|SA92(1):45-58
- Getting Ready to Build(SB)|SA80(8):31
- Grommet Shields (Firewall)(SB)|SA89(5):36
- Gyro Instrument Systems (SB)|SA84(6):27
- Hangaring (SB)|SA83(10):52
- Hangaring (SB)|SA83(11):42
- Hangaring (SB)|SA83(12):22
- Hardware (SB)|SA85(6):22
- Heat Treatment (SB)|SA78(5):16
- Hinges, Piano (SB)|SA85(5):16
- Hole Drilling (DC)|SA72(11):52
- Homebuilt Certification (SB)|SA83(4):39
- Homebuilt Certification (SB)|SA83(5):24
- Homebuilt Recertification/Annual process|SA75(9):23-25
- Homebuilts, Most Popular (SB)|SA81(7):12|(US Census 1979)
- Homebuilts, Older (Pt.1)(SB)|SA82(5):54
- Homebuilts, Older (Pt.2)(SB)|SA82(6):14
- Homebuilts, Sale, Purchase [Forms (SB)|SA84(11):36
- Hoses, Flexible (SB)|SA82(7):14
- IFR Certification (DC)|SA75(7):17
- If You Fly In (SB)|SA93(7):82
- If You Fly In (SB)|SA93(7):82-86
- Ignition Switches (SB)|SA80(4):55
- Inlets, Submerged (NACA Ducts)(SB)|SA81(12):38
- Inspection Access (SB)|SA76(8):24
- Inspection and Acess Plates (TB)|SA73(8):56-57
- Installing A Canopy Window,Why and How (SB)|SA95(7):74-79
- Installing New Lycoming (Pt.1)(SB)|SA92(2):77-82
- Installing New Lycoming (Pt.2)(SB)|SA92(3):84-88
- Instrument Panel Planning (SB)|SA88(5):27
- Instrument Panel Preparation (SB)|SA84(5):18
- Instrument Panels (SB)|SA81(8):11
- Instrument Panels (SB)|SA92(11):85-90
- Instrumentation For VFR Homebuilt(DC)|SA75(3):59
- Interiors (Pt.1)(SB)|SA85(1):49
- Interiors (Pt.2)(SB)|SA85(2):26
- Interiors (Pt.3)(SB)|SA85(3):18
- Interiors (Pt.4)(SB)|SA85(4):23
- Jacking Aircarft (SB)|SA94(11):74-79
- Jacks(SB)|SA83(3):23
- Jigs (SB)|SA78(12):
- Joints in Aircraft Woodwork (SB)|SA91(10):78
- Kits (SB)|SA87(3):33
- Landing Gear Alignment (DC)|SA74(6):54
- Landing Gear Notes (SB)|SA91(2):42
- Landing Gear Problems,Solutions (Pt 1)(SB)|SA79(3):52
- Landing Gear Retraction Details (SB)|SA80(3):40
- Landing Gear Shock Absorbers (Pt 2)(SB)|SA79(4):57
- Landing Gear, Retractable (SB)|SA80(2):22
- Landing Gear, Spring Steel (SB)|SA79(5):15
- Landing/Taxi Lights (SB)|SA84(10):29
- Large Holes in Sheet Metal(SB)|SA93(2):67-69
- Large Radio Stack Openings (SB)|SA90(3):29
- Lighening Holes (SB)|SA93(1):69
- Lycoming Engines (SB)|SA81(6):38
- Magnetos (SB)|SA76(2):20
- Making Your Instrument Panel (SB)|SA96(7):74-79
- Mass Balance Control Surfaces (SB)|SA79(8):32
- Measureing Tips (SB)|SA86(7):27
- Metal Fairings (SB)|SA78(8):56
- Metal Spar Construction(SB)|SA93(5):66-71
- Metal Tips (SB)|SA89(6):30
- Metal Work (TB)|SA72(1):14
- Metal Working Tips (2)(SB)|SA93(2):65
- Metal Working Tips(1)(SB)|SA93(1):66-70
- Modificatins Good/Bad? (SB)|SA95(12):76-81
- Modus Operandi-Personal aircraft procedures (SB)|SA96(6):78-81
- Mufflers/Drawings (DC)|SA75(6):38-39
- NACA Ducts/Inlets (SB)|SA76(6):26-28
- Nailing How To Basics (DC)|SA72(12):36-39
- Night Flying (SB)|SA93(12):81
- Night Flying/Light systems,landing,instrument,anti-collision (SB)|SA77(12):12-15
- Nut Plates (DC)|SA73(6):56
- Nuts Bolts/Identification,selection,usage tips,drawings (SB)|SA79(11):14
- Paint Preparation (SB)|SA76(11):12
- Painting Homebuilts/General guidelines,problems,equipment (SB)|SA77(1):19-21
- Painting Preparation (Pt.2)(SB)|SA85(8):24
- Painting Preparation (Pt.3)(SB)|SA85(9):30
- Painting Preparation (SB)|SA85(7):16
- Painting Wings (SB)|SA92(7):76-79
- Painting Your Homebuilt (Pt2)(SB)|SA95(1):68-73
- Painting a Metal Homebuilt (Pt 1-Preparation)(SB)|SA90(9):29-32
- Painting a Metal Homebuilt (Pt 2)(SB)|SA90(10):37-40
- Painting a Metal Homebuilt (Pt 3)(SB)|SA90(11):33-36,75
- Painting your Homebuilt (Pt1)(SB)|SA94(12):74-79
- Pazmany Builders Network/Newsletter,H.Sponangle,problem solving (DC)|SA71(6):27
- Pitot Static Systems(SB)|SA88(8):27
- Pitot to Panel/Designing an instrument panel (DC)|SA75(4):31-34
- Pitot-Static System (SB)|SA82(1):42
- Plexiglas, Stretch Forming (SB)|SA88(3):32
- Plywood (SB)|SA78(9):34
- Plywood Skinning (Pt.1)(SB)|SA87(5):28
- Plywood Skinning (Pt.2)(SB)|SA87(6):29
- Propeller Sizing (DC)|SA73(2):35
- Propellers, Fixed Pitch (SB)|SA86(8):28
- Push-Pull Controls/Drawings (DC)|SA72(4):27-28
- Push-Pull Tube Controls (SB)|SA81(11):35
- RV-6 Assembly Notes (SB)|SA90(3):33
- Radio Noise (SB)|SA95(4):73-77
- Recreational License (TB)|SA95(9):2
- Rigging Trimming (Pt1)(SB)|SA94(7):111-116
- Rigging/Trimming (Pt2)(SB)|SA94(8):98-104
- Rigicell/Aluminum construction,fiberglas fuel tanks (DC)|SA72(10):51-54
- Rivet Gun Notes(SB)|SA88(1):31
- Riveting/Skinning Tips (SB)|SA87(7):39
- Rudder Cable Fairings (SB)|SA89(11):37
- Rust Protection (SB)|SA95(10):86-91
- Safety Inspections (DC)|SA73(11):35
- Safety Wiring (SB)|SA94(9):76-80
- Sanding, Abrading (SB)|SA89(10):34
- Seat Mechanisms, Sliding (SB)|SA83(7):56
- Setting Up Shop (SB)|SA90(7):32-36
- Shoulder Harnesses (DC)|SA74(1):59
- Sliding Canopies, Doors, Latches (Pt 1)(DC)|SA74(12):17
- Sliding Canopies, Doors, Latches (Pt 2)(DC)|SA75(1):55
- Sliding Canopies, Doors, Latches (Pt 3)(DC)|SA75(2):32
- Spark Plugs (SB)|SA95(5):68-72
- Spars, One-Piece Box (SB)|SA80(12):10
- Spars, One-Piece Box (SB)|SA81(1):34
- Special Tools Cache (SB)|SA96(4):74-77
- Spinner Installation (SB)|SA93(10):78
- Spinner Safety(SB)|SA87(2):27
- Spinners (SB)|SA76(1):57
- Spoilers for Roll Control,Homebuilts (SB)|SA77(10):28-31
- Stall Spin Safety (SB)|SA81(4):47
- Stall Warning Devices (SB)|SA83(9):20
- Stick-On Trim(SB)|SA86(2):54
- Surplus/Salvage Parts (SB)|SA87(9):29
- Swedish Motorsailers,Government Regulation,Exhaust Systems (DC)|SA75(5):60
- Swinging the Compass (SB)|SA96(3):72-77
- Switches (Pt.1)(SB)|SA85(10):23
- Switches (Pt.2)(SB)|SA85(11):54
- Switches (Pt.3)(SB)|SA85(12):57
- Tail Wheel Installation (SB)|SA79(6):15
- Tandem Two-Place Design (DC)|SA70(5):27-28|ALSTON|
- Taps and Dies (DC)|SA72(5):26
- Tips on Glue (TB)|SA72(3):12
- Tire Care (SB)|SA95(11):80-85
- To Build Or Not To Build(SB)|SA93(3):27-31
- Trim Tabs (SB)|SA76(3):19
- Tube Bending (SB)|SA83(8):48
- Tubing End Flattening (SB)|SA84(10):76
- Turner T-40 (Pt.2)(SB)|SA77(3):26
- Turner T-40 (Pt.3)(SB)|SA77(4):26
- VW Engine Hints (DC)|SA73(7):43
- VW Engine Users (SB)|SA78(7):15
- VW Engines (Pt.1)(SB)|SA78(3):17
- VW Engines (Pt.2)(SB)|SA78(4):19
- Ventilation Options (SB)|SA94(1):72-77
- Ventilation System (SB)|SA91(3):41-45
- Washers/Rubber/Fiber Construction (SB)|SA88(8):28
- Weatherstripping (SB)|SA87(11):27
- Weighing Homebuilts (SB)|SA91(7):80-84
- Weight & Balance (SB)|SA78(1):17
- Weight Control (SB)|SA78(2):13
- Welded Steel Tube Structures (SB)|SA80(1):56
- What to Build (SB)|SA93(4):69
- What to Build/Choosing a homebuilt project (DC)|SA73(9):57-58
- Wheel Pants (SB)|SA79(12):24
- Wheel Pants/How to install (DC)|SA75(8):52-53|(diagrams)
- Windshield Covers (SB)|SA79(2):64
- Windshield Trim Work (SB)|SA92(5):70
- Windshild Fitting(SB)|SA84(1):57
- Wing Flap Mechanisms (Pt.1)(SB)|SA82(3):26
- Wing Flaps (Pt.2)(SB)|SA82(4):33
- Wing Modifications (Pt2)(SB)|SA81(3):19
- Wing Modifications (SB)|SA81(2):35
- Wing Plan Geometry (Slats)(SB)|SA81(9):55
- Wing Rib Construction (SB)|SA76(9):19
- Wing Ribs - Metal (SB)|SA76(10):24
- Wing Stand, Mobile (SB)|SA87(12):27
- Wing Tip Design (SB)|SA88(12):27
- Wire Installation (SB)|SA84(7):42
- Wiring Practices (SB)|SA88(7):27
- Wood Aircraft (SB)|SA91(5):71-75
- Wood Propeller for Your Homebuilt (SB)|SA91(1):71-74
- Wood Propellers (DC)|SA74(11):18
- Wood Wing Ribs (SB)|SA94(2):79-83
- Wood Wings-Construction (SB)|SA96(1):75-80
- Wood, Laminating, Bending (SB)|SA86(6):28
- Working with Acrylics,Plexiglas (DC)|SA72(9):18
- Workshop Clutter (DC)|SA74(5):54
- Workshop Tips (SB)|SA95(6):69-75
|
